7900 Security Ceiling System
Description
7900 DetentionGRADE Ceiling System was designed for the high security areas in Federal, State and County Institutions. The 7900 DetentionGRADE Ceiling System is the Architects answer to Increased Security, Noise Reduction and Style. The easy to install panels are designed so that the borders on the panels match the ledger angles and support tees. In cell applications these panels offer extreme resistance to kicking by the inmate in the upper bunk, in dayroom and corridor applications these panels offer better visibility and light reflection along with optional insulation and noise reduction. 7900 DetentionGRADE Ceiling System is used in minimum to maximum security areas to provide an architecturally attractive ceiling while protecting exposed mechanical equipment from inmate abuse.
Available Ceiling Systems
7900A DetentionGRADE Ceiling System is a perforated panel system that is screwed together for tight access environments. This system requires a minimum of 4" of clear access above the installation to allow for the fastening of the panels together.
7900B DetentionGRADE Ceiling System is a perforated panel system that has interlocking panels that requires less installation labor while providing a greater bearing load. This system requires a minimum of 8"(for 12" panels), 14"(for 18" panels) and 20"(for 24" panels) of clear access above the installation to allow the panels to lock together.
7900C DetentionGRADE Ceiling System is a non-perforated panel, interlocking system that requires less installation labor while providing a greater bearing load. This system requires a minimum of 8"(for 12" panels), 14"(for 18" panels) and 20"(for 24" panels) of clear access above the installation to allow the panels to lock together.
Standard Features
Available in standard galvanealed finish or baked on powder coatings in available architectural colors.
16 ga. ready-to-paint jet coat panels
12 ga. ready-to-paint ledger angles and tee sections
Optional Features
-T 14 ga. ready-to-paint jet coat panels
-12 12" wide panel
-18 18" wide panel
-24 24" wide panel
-G G90 galvanized material in lieu of standard material
-PC Baked-on powder coat paint, specify architectural color Powder Color Brochure below
-NR Noise reduction insulation with 20ga galvanealed metal backing
Shipping weight: 4 - 6 lbs./sqft